Sorry, this product is currently out of stock.
GoodHome Walls & Ceilings Princeton Matt Emulsion paint, 5L
How much will I need?
Product details
Product information
GoodHome walls and ceilings paint is ideal for your interior spaces. It gives a smooth and wipeable finish, so your newly painted look will last for longer
- Suitable for use on Wall & ceilings
- Surface Preparation - New plaster or plasterboard should be sealed with a plaster sealer. For non-powdery surfaces or to cover contrasting colours, prepare with a walls and ceilings primer. Painted surfaces should be sanded, clean and dry. Fill any holes or defects with filler. When sanding, wear a face mask to avoid dust inhalation
- Instructions for Use - Stir gently before use. Apply using a brush or roller, when the temperature is between 10°C and 30°C. For best results, recoat after 2-4 hours.
- Instructions for Storage - Store any leftover paint between 5 and 30°C. Best used within 1 year of opening.
Features and benefits
- Wipeable meaning it is easy to keep clean
- This paint is water based meaning it is low odour and brushes can easily be cleaned in water
- Ensures good hiding power, depending on your selected colour and the surface you are painting
- We recommend applying a primer before colour top coat
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one. May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | GoodHome |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | Princeton |
| Container type | Tub |
| Coverage | 60m² |
| Coverage per litre | 12m²/L |
| Drying time | 8-12 h |
| Maximum application temperature | 30°C |
| Minimum application temperature | 10°C |
| Number of coats | 2 |
| Recoat time | 2-4 hours |
| VOC level | Minimal |
| Volume | 5000ml |
| Product code | 3663602401353 |
Documents
Range Brochure
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
3.89 / 5(37 reviews)Ed209 - 1 / 5 - 12/10/2025
Uneven finish after 3 coats - avoid
We used this to paint over a light colour wall. A straightforward job I expected to get done in a few hours over two days for two coats. The paint went ok v unevenly and even after three coats it was still visibly uneven in colour and was looking like it may need another two coats. At that point we decided to buy another brand. I've painted many colours and rooms and never had a paint do this. A similar flat Matt from Fired Earth did a similar job in two coats. This paint simply isn't worth trying. It may seem a low price - but we've used three pots to do half a job, when coverage indicates that one pot should have almost been enough Avoid!
Rory - 5 / 5 - 31/12/2023
Great base coat paint
Bought two of these a while ago and did the job. Just a base coat for the epoxy floor i will be laying over it in the summer.