Volden Transparent Mitre adhesive 200ml 50g, Set of 2

Product information

2-Part system (adhesive and activator) creates a high strength bond in 10 seconds, reducing assembly time.

• Guarantee - Statutory
• Suitable for Metal, rubber, wood & plastics except PTFE, HTPE, PP
• Keep products in the unopened container in a cool dry location. Best when stored at 2°C to 8°C. Do not freeze. Keep container tightly closed.
• Apply a drop or drops of the adhesive to one of the surfaces. On the other surface to be bonded, spray the activator. Press parts together and hold for 10 seconds. Maximum strength achieved in 24-48 hours.
• DANGER Aerosol. Contains: N,N-DIMETHYL-P-TOLUIDINE; Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane; Petroleum Gases, Liquefied: Petroleum Gas <0.1 % 1 ,3 Butadiene; Hydrocarbons, C6, isoalkanes, <5% n-hexanes. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves, eye protection.

Features and benefits

• Activator is used to accelerate curing process.
• Not suitable for: glass bonding or applications where the bonded joint may be immersed in water
• Over application or application on wet surfaces may cause discolouration. Do not use on u-PVC if it is not dry or when moisture is present in the atmosphere.