Volden Plasterboard Jointing, filling & finishing compound 5kg 4.2L Bag

Product information

The perfect all-rounder. Gypsum based, this powdered product has been designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating.

• Each 5kg bag can be mixed with 1.9-2.1L of clean water in an appropriate bucket/container. Mix continually until achieving a smooth consistency. For joints and corners, jointing tape can be used and smoothed over with a 200mm wide strip of compound. When the first coat (1mm) is dry or set (approx. 120-180mins) a second coat may be applied. Edges are best feathered 50mm past the first coat. End and butt joints should be feathered 60mm past the first coat. If more coats are needed, edges should be finished as above. Sanding should be done once fully dry (usually overnight). A primer or sealer should be applied before final decoration.
• Designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating
• Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.

Features and benefits

• Perfect for filling, smoothing walls, ceilings and plasterboard repairs
• Powdered Formula
• Easy to sand
• Working time 60 mins