Valspar Trade Wood & Metal Pure brilliant white Satin Metal & wood paint, 2.5L

Product information

This Pure brilliant white satin wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply 2 coats with a brush, roller or spray and leave for 1 hour to dry - a great way to give the surfaces additional protection. Covers 25 m² per litre on average.

• Guarantee - Statutory
• Suitable for use on Metal & wood surfaces
• Surface Preparation - The surface must be clean, dry, free of dust and grease. Glossy surfaces should be deglossed before painting. Repair all damaged areas. Remove old, loose or flaky paint. Cover the surrounding area whilst decorating to provide protection against paint spills. For best results, seal new, bare-wood surfaces with Valspar® interior primer and undercoat. New, fresh plaster must be sealed with Valspar® interior primer & undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat
• Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
• Instructions for Storage - Tightly sealed in cool frost free condition.

Features and benefits

• Non-yellowing
• Durable formula
• Excellent flow & levelling
• Quick drying
• Tough and durable
• Excellent coverage
• Scrubbable
• Water-based formula
• Low odour
• Low VOC