Valspar Trade Pure Brilliant White Smooth Matt Masonry paint, 5L Tin

Product information

Valspar® Trade Masonry, with Seasonflex technology, is a high-quality, microporous paint for exterior walls. Formulated for the professional, it can be applied in all seasons in temperatures above 2°C. The microporous film helps evacuate wall humidity, while being rain resistant 30 minutes after application, it is also UV resistant for better weather protection.

• Guarantee - Statutory
• For use on Brick, concrete & stone
• Does not bridge cracks
• Surface Preparation - The surface must be clean, dry and free of dirt, chalk and grime. Repair all damaged areas and remove loose or flaky paint. If mould, moss, algae or lichen are present, they must be completely removed. Loose, chalky surfaces should be primed with Valspar Trade Masonry Stabilising Solution.
• Instructions for Use - For outdoor use only. Do not apply in direct sunlight. Apply when the temperature of the surface being painted is above 2°C. For best results, this product should be used between 2 and 15 ° C. Stir contents thoroughly to ensure paint is evenly mixed. Purchase enough paint to complete the job. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge. Extra coats may be required when making dramatic colour changes. Do not thin this product. Allow at least 4 hours between coats depending on weather conditions. In low temperature product dries slower and achieves water resistance later. Wipe up spills immediately with a damp cloth.

Features and benefits

• All Seasons - can be applied down to 2°C
• Showerproof in 30 minutes
• Microporous & Breathable
• Weather & Dirt Resistant
• Water-based
• Low Odour
• Minimal VOC