Valspar Trade Interior Wall & ceiling Matt Primer & undercoat, 2.5L

Product information

A tintable primer and undercoat that provides good adhesion of the top coat for a high-quality finish for interior walls & ceilings.

• Washable
• Suitable for Embossed wall coverings & plaster
• Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Remove old, loose or flaky paint and repair all damaged areas before painting. Lightly sand existing paint and wipe down with a damp cloth to remove dust. The surface must be clean, dry and free of dust and grease.
• Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge. Extra coats may be required when making dramatic colour changes. Dries to touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.

Features and benefits

• High Opacity & Covering Power, hides bold colours
• Strong Adhesion
• Sprayable
• Low VOC
• Valspar® Trade Tintable Primer & Undercoat is expertly tinted to prepare for dramatic colour changes and optimal colour appearance for vivid shades, allowing for build and obliteration. Its advanced water-based technology is quick drying, low in odour and provides good adhesion of the top coat for a high-quality finish for interior walls & ceilings.
• Water-based
• Low odour
• Low VOC