Valspar Trade Contract Pure Brilliant White Matt Emulsion paint, 10L

Product information

This wall & ceiling paint is suitable for and covers 100m² per litre on average.

• Guarantee - Statutory
• Suitable for use on Wall & ceilings
• Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when temperature of the surface being painted is above 10 °C. You can dilute this paint with water to use as a first coat on new plaster. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
• Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.
• Instructions for Storage - Protect from frost

Features and benefits

• High opacity, meaning fewer coats are required for optimal coverage and finish
• Ideal for new plaster
• No splatter
• Low odour
• For interior walls & ceilings
• Suitable for a brush, roller or sprayer
• Water based formula
• Up to 16m² per Litre
• Minimal VOC