Skip to content
BQIE

Start typing your search to have a list of suggestions.

 

2 people bought this in 48 hours

Multi buy

Valspar Premium Kitchen & Bathroom Pure Brilliant White Matt Emulsion paint, 2.5L

€36€14.40 per l

Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.

See more products in this offer
How much will I need?

Product details

Product information

An exceptionally scrubbable matt emulsion, resistant to mould & moisture damage, perfect for use in kitchens & bathrooms.

  • Guarantee - Statutory
  • Suitable for use on Wall & ceilings
  • Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
  • Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
  • Instructions for Storage - Protect from frost

Features and benefits

  • Mould & Moisture Resistant
  • Excellent Scrubbability
  • Fantastic Coverage
  • Minimal VOC
  • Water-based

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Specifications

BrandValspar
Application methodBrush, roller or spray
BaseWater-based
ColourPure Brilliant White
Coverage25m²
Drying time3 h
Maximum application temperature25°C
Minimum application temperature10°C
Number of coats2
Quick dryQuick dry
Recoat time4 hours
VOC levelTrace
Volume2500ml
WashableScrubbable
Product code5055018187712
Safety Information
Manufacturer / EU responsible person
Reviews
3.48 / 5(25 reviews)