Valspar Interior Wall & ceiling Matt Emulsion, Base B, 236ml Tester pot

Product information

Test out your favourite Valspar colours at home – this sample pot has a matt finish and is suitable for interior walls and ceilings.

• Stain resistant
• Scrubbable
• Suitable for Wall & ceiling
• Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
• Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.

Features and benefits

• Splatter Resistance
• Simply wipe clean
• Maximum Coverage
• Pure Colour HD Light Refracting Quality
• We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.