See more Paint
Valspar Express Coat Pure Brilliant White Matt Emulsion paint, 10L
€
22
€
2.20
per l
Offer - 2 for €32. Discount applied in basket.
Checking availability...
Product details
Product information
Express Coat by Valspar® is a high opacity, low splatter emulsion that gives good coverage - it's suitable for interior wall and ceiling surfaces, particularly new plaster.
- Guarantee - Statutory
- Suitable for use on Wall & ceilings
- Surface Preparation - The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting. Repair all damaged areas. Remove old, loose or flaky paint. New, fresh plaster must be sealed with this product or Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with a primer prior to applying the finishing coat.
- Instructions for Use - For indoor use only. Stir well before use to ensure paint is thoroughly mixed. Do not apply in damp or humid conditions. Apply when temperature of the surface being painted is above 10°C. When purchasing more than 1 container of the same colour, intermix containers to ensure colour uniformity. Do not thin this product. Touch dry in 1 hour. Recoatable in 2–4 hours.
- Instructions for Storage - Don't allow to freeze
Features and benefits
- Perfect for bare plaster
- High opacity
- Low splatter
- Easy to clean up
- Available in Matt & Silk
- This formulation has been designed for faster results and a flawless finish. A water-based formula meaning it’s both easy to use and to clean up, so you can spend more time enjoying your transformation.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Brand | Valspar |
---|---|
Application method | Brush, roller or spray |
Base | Water-based |
Colour | Pure Brilliant White |
Container type | Tub |
Coverage | 100m² |
Drying time | 2-4 h |
Maximum application temperature | 30°C |
Minimum application temperature | 10°C |
Number of coats | 2 |
Quick dry | Quick dry |
Recoat time | 2-4 hours |
VOC level | Minimal |
Volume | 10000ml |
Product code | 5055018187347 |