V&CO Interior Wall & ceiling Dead-Flat Matt Emulsion, Base A, 2.5L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerSorry, the colour you chose is not available in this base. Please select a different colour or finish.
Product details
Product information
V&Co premium paint offers an exceptional dead flat matt finish with rich depth of colour, maximum coverage and superior durability. The advanced, water-based formula is hardwearing and scrubbable, ensuring your walls remain immaculate over time.
- Stain resistant
- Scrubbable
- Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
- Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
Features and benefits
- Ultimate Dirt & Stain Resistance
- Highly Pigmented
- Low Splatter
- Ultra-low VOC & Hypoallergenic
- Allergy UK Accredited
- We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
- This product has a Valspar Love Your Colour Guarantee
- We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Brand | V&CO |
---|---|
Application method | Brush or roller |
Base | Water-based |
Coverage | 30m² |
Drying time | 1 h |
Finish | Dead-Flat Matt |
Location | Interior |
Maximum application temperature | 25°C |
Minimum application temperature | 10°C |
Minimum touch dry time | 1h |
Number of coats | 2 |
Recoat time | 2-4 hours |
VOC level | Trace |
Volume | 2500ml |
Product code | 5055018186715 |