See more Radiator heating elements
Terma 43D 1000W Silver Manual Heating element
€
96
Checking availability...
Product details
Product information
The Terma 43D element is pre-programmed to run at an internal temp of 43°c, for Low Surface Temp (LST) style operation*When specifying this element, to help ensure correct surface temp, reduce the output of your radiator (as water) by 40% (i.e. for a 200w towel rail install the 120w element).
- Guarantee - 2 years
- CE marked
- Comes with 1x Heating Element with Control Head
- Overheat cut out protection
Features and benefits
- The Terma 43D element is pre-programmed to run at an internal temp of 43°c, for Low Surface Temp (LST) style operation*
- When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable dependant on their design and how the heat will cycle internally around the rail, so avoid electrifying certain models as they won't work and this will not be the fault of the element
- If you are buying a heating element to convert a towel rail for use as dual fuel (electric in the summer and central heating in the winter) regularly bleed the towel rail, as on a central heating system air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels.
Specifications
Brand | Terma |
---|---|
Cable length | 1.5m |
Fuel type | Electric |
IP rating | IPX5 |
Pack quantity | 1 |
Power output | 1000W |
Power voltage supply | 230V |
Product height | 630mm |
Room use | Any room, excluding wet-rooms |
Standard | EN442 |
Product code | 5901804567025 |