Sika Clear Masonry waterproofer, Jerry can 5L
€28€5.60 per l
Product details
Product information
This ready to use Sikagard facade from Sika is a water based impregnation emulsion. Sikagard Facade makes walls and facades water repellent and provides long lasting protection against water ingress. It is vapour permeable and allows the substrate to breathe.
- Instructions for Use - To apply, the substrate should be clean and free from dust, dirt, oils and grease. Cracks in the substrate need to be repaired prior to using this product. For the best results use on dry and very absorbent substrates. The substrate must look dry with no damp patches before applying this product. This product cannot be used on concrete. Protect varnished, painted or glass surfaces when this product is being applied otherwise this may cause staining. This product is not suitable for use on horizontal surfaces, basin, pools or tanks. Sikagard® Facade Water Seal cannot be overcoated with emulsion or solvent-based paint.
- Please refer to Safety Data Sheet (SDS)
- Guarantee - Statutory
Features and benefits
- Strong water repellent capability
- Improves resistance to dirt pick up, and reduces fungal, algal and lichens growth
- Water-based and environmental friendly
- Can be applied on mortar, masonry, fibre-cement & stone
Legal information
- Causes skin irritation. Causes serious eye damage.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Sika |
|---|---|
| Container type | Jerry can |
| Pack quantity | 1 |
| Colour group | Transparent |
| Location | Exterior |
| Maximum application temperature | 35°C |
| Minimum application temperature | 5°C |
| Product code | 5055492702975 |