5 people bought this in 48 hours
Ronseal Problem wall White Matt Anti-mould paint, 2.5L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerProduct details
Product information
This White matt anti-mould paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush and leave for 1-2 hours to dry - a great way to give the surfaces additional protection. Covers 13 m² per litre on average.
- Instructions for Use - Thoroughly stir the paint so the consistency is smooth. Pour the contents of the tin into a tray and coat your brush or roller. Wipe off any excess on the rim of the tray. Apply the first coat and wait four hours for it to dry. Apply the second coat and wait four hours for it to dry. If you can still see colour through the paint, apply more coats until the colour is no longer visible. Once you have applied the last coat, wait 24 hours before letting condensation build up in the room again.
- Remove any mould & sand off any flaking paint before applying.
Features and benefits
- Tough and scrubbable finish
- Resists steam
- Easy wipe-clean emulsion
- Lasts for six years
- Stops mould from growing
- Moisture & steam resistant
- Paint stays mould free
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | White |
| Container type | Tin |
| Coverage | 30m² |
| Drying time | 1-2 h |
| Finish | Matt |
| Location | Interior |
| Minimum touch dry time | 1h |
| Number of coats | 2 |
| Paint type | Protector |
| Quick dry | Quick dry |
| Recoat time | 4 hours |
| RGB value | 255, 255, 255 |
| VOC level | Low |
| Volume | 2500ml |
| Product code | 5010214866243 |
Documents
Safety Data Sheet
Safety Information
Manufacturer / EU responsible person
Reviews
4.07 / 5(42 reviews)Delboy - 5 / 5 - 30/3/2025
Excellent Paint
Did an excellent job. Coverage was very good. Got two coats for a standard sized bathroom. Did exactly what it said it would do. No more mould or condensation problems. Aplication was easy - brush or roller. Great finish.
Ollie68 - 5 / 5 - 7/11/2024
Get rid of mould
Does and excellent job in preventing mould from coming back.