Ronseal Doorstop Paint Tile red Satin Doorstep paint, 750ml

Product information

A washable, tile red doorstep paint in a satin finish. Covers up to 12 m² per litre and dries in 24 hours.

• Guarantee - Statutory
• Suitable for use on Brick, concrete & stone surfaces
• Surface Preparation - Pick a dry day that’s above 10°c. Give your steps a good brush to get rid of leaves, twigs and moss. Wash with warm, soapy water to ensure the surface is clean. Leave your steps to dry. If your steps have been previously painted, use a wire brush to remove any loose or flaking paint and then wipe them down with white spirit.
• Instructions for Use - Give the paint a really good stir to make sure the colour pigment is thoroughly mixed. Use a medium sized brush and apply the first coat. Let it dry for four to six hours before applying the second coat. You’ll only need two for diamond hard protection and a rich colour. Around four to six hours after applying the second coat, your steps will be ready to walk on. After 24 hours it will be completely dry and hard. Simply clean your brushes in warm soapy water.

Features and benefits

• Advanced slip resistant technology
• Won't scuff or scratch
• No need to use a primer
• Quick drying formula
• This Diamond Hard Doorstep Paint will keep your entrance looking great whatever the weather. It's extra durable so it will stay looking great for longer and has extra slip resistance to prevent any unfortunate mishaps.
• Tough & durable
• Walk on after 4-6 hours
• Two coats for total coverage
• Paints up to 12m2 per litre