Ronseal Anti Mould White Matt Wall & ceiling Protector Spray paint, 400ml
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offer
Under 18 yearsProduct details
Product information
This Matt White anti-mould aerosol paint from Ronseal has been specially designed to give a stunning finish around your home. Simply apply and leave for 10 minutes to dry - a great way to revamp your home.
- Suitable for Plaster
- No primer required
- Shake the can until you hear it rattle. Keep shaking for another minute. Hold the can upright roughly 20-30cm away from the wall or ceiling. Spray from side to side to get an even finish and wait 10 minutes for the first coat to dry. Apply the second coat and wait another 10 minutes, check the coverage to see if you need to apply a third coat. After you’ve applied the final coat, wait 24 hours before letting condensation build up in the room. Don’t paint over the Anti Mould Paint as this will stop it from working.
- Guarantee - Statutory
Features and benefits
- Tough Finish
- Resists Steam
- Dry in 10 minutes
- Lasts for six years
- Moisture & steam resistant
- Tough, scrubbable finish
- Lasts for six years
Legal information
- Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Application method | Aerosol |
| Base | Solvent-based |
| Colour | White |
| Container type | Spray can |
| Coverage | 5.2m² |
| Drying time | 10 min |
| Finish | Matt |
| Instructions for storage | Keep away from heat and sources of ignition. |
| Location | Interior |
| Maximum heat resistance temperature | 40°C |
| Nozzle type | Standard |
| Number of coats | 2 |
| Paint type | Protector |
| Permanent/temporary | Permanent |
| Recoat time | 10 minutes |
| Suitable use type | Plasterboard |
| Minimum touch dry time | 0.16h |
| VOC level | Very high |
| Volume | 400ml |
| Product code | 5010214874811 |
Documents
Safety Data Sheet
Safety Information
Manufacturer / EU responsible person
Reviews
4.65 / 5(20 reviews)Narshe - 5 / 5 - 26/8/2024
Good coverage, easy to use
Used the product 6-8 weeks ago and the area still looks perfectly clean and free of mould. It used to come back in 1-2 weeks in the same area even after being treated with multiple cleaning products.