Pure brilliant white Smooth Matt Masonry paint, 10L

Product information

A popular exterior matt masonry paint that is suitable for use on wall, making it a great choice to give your home a refresh. Pure brilliant white is a stunning shade of white that will add a contemporary feel to your design. The paint can be applied on concrete, pebble-dash, render and stone surfaces. After application, this masonry paint will achieve a impeccably matt surface that will look good as new for a long time. This 10L size will cover up to 10 m² on average. You can use a brush or roller to apply an even layer. It will dry quickly between coats meaning you can recoat it in 4 hours. Furthermore, our masonry paint is water-based and has minimal VOCs, so it’s safe for you and your home.

• For use on Concrete, pebble-dash, render & stone
• Surface Preparation - Ensure the surface is clean and dry, free from dirt and grease before painting. Brush or wash down the surface thoroughly to remove lime wash, chalky coatings and all loose or flaking material. Treat areas affected by mould, algae, moss and lichen or dirt with an appropriate fungicidal wash. Fill any defects or holes with an exterior filler or a sand and cement mix. Fresh cement or concrete must dry 1 month before painting. Wash any bare cement or concrete with a slightly acid solution. Allow the surface to dry 72 hours after washing. Slight variations of colour can occur between paint containers. Apply pliolite based masonry paint diluted with 5% white spirit as a primer to stabilise porous surfaces
• Instructions for Use - Stir gently before use. Apply up to 2 coats of this paint with a brush or exterior roller on new surfaces or to cover contrasting colours. Apply paint in dry weather conditions, between 5°C and 30°C. Avoid application in direct sunlight or when surfaces are hot.

Features and benefits

• Ensures a smooth and durable matt finish
• Water based for a low odour
• Breathable allowing moisture to evaporate