Mountfield Freedom100 24V 2A Li-ion Standard Battery charger - C215 SU

Read manual for full safety and warning details. This charger is designed for rechargeable lithium-ion batteries only. Do not charge non-rechargeable batteries, as some may explode, causing injury or property damage. Use only the charger specified by the manufacturer. A charger suitable for one battery pack may pose a fire risk when used with another. Place the charger on a flat, solid surface; do not mount it on the wall. Do not recharge the battery pack in wet or humid conditions. Avoid immersing in water or liquids. Keep liquids away from the charger and do not expose it to splashing or dripping. Never use the charger in environments with vapours, flammable substances, or on flammable surfaces (e.g., paper, fabric). The charger can heat up during use and may cause a fire. Do not probe the charger with conductive materials or use it for anything other than its intended purpose. Keep the ventilation grids clean and avoid placing the charger on soft surfaces like blankets or pillows. Ensure small metal objects do not enter the charger. Never connect two chargers simultaneously. Before use, verify that the charger’s output voltage and current match the battery requirements. Do not open the charger or attempt to repair it. If the cover is damaged, dispose of the charger. If the external cable is damaged, dispose of the charger as it cannot be replaced. Unplug the charger before cleaning. Never use damp cloths or detergents. Clean the charger with a dry cloth only.