Leyland Trade Universal White Multi-surface Primer & undercoat, 5L
€45€9 per l
Product details
Product information
Apply this primer & undercoat from Leyland Trade to interior & exterior , using a brush, to prepare the surface for painting. It takes 1-2 hours to dry and will cover 13 m² per litre on average.
- Water-based
- Suitable for Brick, cement, concrete, plaster & wood surfaces
- Brush, roller or spray application
- Instructions for Use - Stir well before use. Apply by brush or roller. Apply liberally, brushing firmly into the surface. Treat all accessible timber, in particular the end grain. A second coat serves as an excellent undercoat for Leyland Gloss Finish. Do not apply when the temperature is below 10˚C or externally when rain is imminent.
Features and benefits
- Quick drying time
- Low odour
- Provides adhesion
- A low odour water based undercoat, suitable for bare timber surfaces, MDF, plaster, drywall and render
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of: 5-chloro-2-methyl4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no.220-239-6] (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Leyland Trade |
|---|---|
| Colour | White |
| Coverage | 65m² |
| Drying time | 2-4 h |
| Location | Interior & exterior |
| Pack quantity | 1 |
| Recoat time | 1-2 hours |
| Suitable surface | Multi-surface |
| VOC level | Minimal |
| Product code | 5010426773193 |