Inlight Dafyd Satin Copper Antique copper effect Wired LED Wall light
Product Features
- The Dafyd Wall Light boasts a rich, enduring Antique Copper finish that exudes classic sophistication. It's a statement piece that complements various decor styles, from industrial to traditional.
- Requires 1 x 6w Max LED E14 Candle/Globe Bulb
- Bulbs not included
Product details
Product information
Product information
Introducing the Dafyd Wall Light in antique copper finish will illuminate your space with timeless elegance. Elevate your interior décor with the exquisite Dafyd Wall Light, a striking blend of vintage charm and contemporary style.
- Bulb not included
- Non-dimmable
- Fittings & fixings included
- Guarantee - 1 year
Features and benefits
- The Dafyd Wall Light boasts a rich, enduring Antique Copper finish that exudes classic sophistication. It's a statement piece that complements various decor styles, from industrial to traditional.
- Requires 1 x 6w Max LED E14 Candle/Globe Bulb
- Bulbs not included
- The elegantly tapered cone-shaped shade showcases timeless design and directs light downwards, creating a cozy atmosphere in any space.
Specifications
| Bulb type | Candle |
|---|---|
| Cap fitting | Small edison screw cap (E14) |
| Depth (mm) | 210mm |
| Equivalent wattage | 28W |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Glass finish | Smoked |
| Height (mm) | 250mm |
| IP rating | IP20 |
| Light technology | LED |
| Material | Glass & metal |
| Maximum bulb wattage | 6W |
| Model name/number | BQ-CB-33234-SMK |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Power output | 28W |
| Power source | Mains-powered |
| Power voltage supply | Mains fed |
| Style | Modern |
| Voltage | 240V |
| Width (mm) | 140mm |
| Wiring required | Wiring required |
| Product code | 5020024711022 |
Safety Information
Warnings on manuals (for all ceiling/wall lights) Important Safety Information All ceiling fittings should be connected via a 5-amp fused circuit and must be installed in accordance with current applicable building and electrical installation regulations. Before installation and servicing, disconnect the electrical supply at the mains. Carefully observe all instructions or warnings that are labelled on, or supplied with, your product. Unless otherwise stated, products are suitable for normal indoor use only and should not be used where water or high humidity may affect them. If in any doubt, consult a qualified electrician. Cleaning care The fitting should be cleaned with a soft, dry cloth only. Do not use polishes or abrasive cloths. Safety information For your safety, please remember the following: Always switch off the supply before removing shades/covers, changing lightbulbs or cleaning.
Manufacturer / EU responsible person
EU responsible person
Authorised Representative Compliance Ltd
Address
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
Ireland