Inlight Bureau Satin Nickel Wired LED Wall light
Product Features
- The Bureau wall light will effortlessly complements a wide range of interior design aesthetics, from minimalist to traditional.
- Requires 1 x 6w Max LED E14 Candle/Globe Bulb
- The distinctive cone-shaped shade of this wall light not only enhances its aesthetic appeal but also directs the light in a focused and pleasing manner, providing both style and functionality.
Product details
Product information
Product information
Elevate your interior décor with the stunning Bureau wall light, a perfect fusion of contemporary elegance and classic style. Crafted in a smooth satin nickel finish, this fixture adds a touch of modern luxury to any room while offering a unique and captivating cone-shaped shade design.
- Bulb not included
- Non-dimmable
- Fittings & fixings included
- Guarantee - 1 year
Features and benefits
- The Bureau wall light will effortlessly complements a wide range of interior design aesthetics, from minimalist to traditional.
- Requires 1 x 6w Max LED E14 Candle/Globe Bulb
- The distinctive cone-shaped shade of this wall light not only enhances its aesthetic appeal but also directs the light in a focused and pleasing manner, providing both style and functionality.
Specifications
| Bulb type | Candle |
|---|---|
| Cap fitting | Small edison screw cap (E14) |
| Depth (mm) | 215mm |
| Equivalent wattage | 28W |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Height (mm) | 160mm |
| IP rating | IP20 |
| Light technology | LED |
| Material | Metal |
| Maximum bulb wattage | 6W |
| Model name/number | BQ-CB-39586-ABRS |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Power output | 28W |
| Power source | Mains-powered (plug-in) |
| Power voltage supply | Mains fed |
| Style | Modern |
| Voltage | 240V |
| Width (mm) | 150mm |
| Wiring required | Wiring required |
| Product code | 5020024711046 |
Safety Information
Warnings on manuals (for all ceiling/wall lights) Important Safety Information All ceiling fittings should be connected via a 5-amp fused circuit and must be installed in accordance with current applicable building and electrical installation regulations. Before installation and servicing, disconnect the electrical supply at the mains. Carefully observe all instructions or warnings that are labelled on, or supplied with, your product. Unless otherwise stated, products are suitable for normal indoor use only and should not be used where water or high humidity may affect them. If in any doubt, consult a qualified electrician. Cleaning care The fitting should be cleaned with a soft, dry cloth only. Do not use polishes or abrasive cloths. Safety information For your safety, please remember the following: Always switch off the supply before removing shades/covers, changing lightbulbs or cleaning.
Manufacturer / EU responsible person
EU responsible person
Authorised Representative Compliance Ltd
Address
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
Ireland