Sorry, this product is currently out of stock.
Grohe Blue Pure Chrome effect Filtered hot & cold water tap
Spend more, save more. Including €3,000 off when you spend €8,000 on kitchens. Discount applied in basket.
See more products in this offerProduct details
Product information
With a stylish smooth chrome finish, this Grohe mixer tap guarantees life-long smooth and accurate water and temperature control, and is flexible and extremely easy to install thanks to the Easy Installation System
- Comes with Tap, filter & counter
- Operation: Single lever
- Suitable water pressure - High pressure
- Hose supplied
- Requires 3/8" UK adaptors
- Guarantee - 10 years
Features and benefits
- Freshly filtered water on tap whenever you want it
- Separate inner water ways for filtered and non-filtered water
- High spout design with 150° Swivel range perfect for multi bowl sinks
Specifications
| Aerator type | Honeycomb |
|---|---|
| Connection size | 10mm |
| Connection type | BSP |
| Effect | Chrome effect |
| Filter type | Water inlet filter |
| Finish | Gloss |
| Hose diameter | 9.2mm |
| Hose length | 530mm |
| Material | Brass |
| Maximum operating pressure | 10bar |
| Minimum operating pressure | 0.5bar |
| Number of tap holes | 1 |
| Depth (cm) | 22.3cm |
| Height (cm) | 38.4cm |
| Weight (g) | 5365g |
| Width (cm) | 5.2cm |
| Spout height | 258mm |
| Spout reach | 223mm |
| Spout type | Swivel |
| Tap cartridge type | 28mm ceramic cartridge |
| Tap flow type | Double channel |
| Product code | 4005176565533 |
Documents
Legal Information
Safety Information
Installation must be performed in compliance with applicable local construction and plumbing regulations. If in doubt, contact an expert.
Before changing the fitting switch off main shutoff valve
Before installation, water should be rinse through the pipe to remove any residue. Damage on the product can be avoided.
"CAUTION! Do not overtighten screw connections, even with the seal inserted, to avoid damage."
Check at regular intervals to make sure that the installation is not leaking.
Do not use abrasive sponges, scouring agents, organic solvents or acidic cleaners, limescale removers, household vinegar or cleaners containing acetic acid for cleaning.
The filter system may only be operated with cold water of foodstuff grade.
The filter head is equipped with a non-return valve according to EN 13959.
The filter system must be flushed each time the filter is changed.
At the installation location, the filter system must be protected against mechanical damage, heat and direct sunlight. Do not install near heat sources or an open fire.
Manufacturer / EU responsible person
EU responsible person
Grohe AG
Address
Feldmühleplatz 15
Düsseldorf
North Rhine-Westphalia
40545
Germany