Gorilla Wood glue, 1L

• Suitable for Wood
• Resistant to moisture & water
• Store in a cool/low-temperature, well-ventilated (dry) place. Keep container closed when not in use. Keep away from frost. Keep away from heat and direct sunlight
• Prepare - Surfaces should be clean and dry. Apply glue generously to the surface before joining and gripping for 20-30 minutes (parts should fit tightly). In Use - bead can be applied thick or thin using the unique cap. Remove any excess glue with a clean, wet cloth or scrape it off once the glue dries. Allow bond to dry for 24 hours. Clean Up - Remove clear applicator tip to clean out glue build-up. Close cap after use. Store at room temperature. If the glue thickens or separates, shake vigorously until the original consistency is restored.
• Not recommended for structural or load-bearing applications, or for continuous submersion or below-waterline use. Keep out of reach of children

Features and benefits

• Dries natural colour - Dries a natural wood colour for a clean bond line
• D3 water resistant - Perfect for indoor and outdoor applications
• Anti-clog cap - Unique cap stops drying out, preventing blockages
• Short grip time - Grips in just 20-30 minutes