GoodHome Poprock White Wood effect Self-adhesive Vinyl plank, 0.97m²

Vinyl floor can be slippery when wet. Indoor and domestic use only

Use protective pads under furniture or equipment to reduce risk of surface damage.

After installation, do not wash the floor or get it wet for 5 days. After installation, room temperature should be maintained between 15 and 35°C and humidity between 40 and 65% .The Product should be installed and maintained according to the assembling instructions

Please do not use rugs with rubber backing or carpets with vinyl floors

Porous surfaces, such as cement, plywood, hardboard and chipboard should be sealed with a suitable primer. Timber plank floors should be overlaid. New floors must be allowed to dry out completely

Before installation, tiles and planks should be unpacked and stored flat in the room for at least 24h at 18-24degC and humidity maintained between 40% and 65%

All tiles and planks should be checked before and during installation for faults which are clearly visible; this will reduce problems when assembling and identify any colour differences. The inspection should be performed in daylight, or under good artificial lighting, in the room in which the Products are to be installed