GoodHome Poprock Dark grey Wood effect Self-adhesive Vinyl plank, 0.97m²
How much will I need?
Product details
Product information
GoodHome Poprock Vinyl flooring has a textured surface to replicate the look and feel of real wood. Each plank is 2mm thick, with a 0.15mm top wear layer to protect it from use. This flooring is perfect for dry areas of the home such as living rooms and bedrooms. It is easy to lay just peel and stick the planks in position, plus it can be cut easily with just a utility knife leaving little mess. Flooring should be built to last that's why we've guaranteed ours for 5 years.
- Guarantee - 5 years
- Suitable for use in Multi-room
- Resistant to water spots. Splashproof
- No adhesive required
Features and benefits
- Dark grey wood pattern for a sophisticated look
- Self-adhesive design for a simple installation process
- Textured surface mimics natural wood
- Protective layer ensures durability
- Easily customisable with a utility knife for precise fitting
Specifications
| Brand | GoodHome |
|---|---|
| Colour | Dark grey |
| Effect | Wood effect |
| Style | Traditional |
| Finish | Matt |
| Material | PVC |
| Length (mm) | 914mm |
| Width (mm) | 152mm |
| Thickness (mm) | 2mm |
| Coverage | 0.97m² |
| Pack quantity | 7 |
| Product code | 3663602563372 |
Safety Information
Vinyl floor can be slippery when wet. Indoor and domestic use only
Use protective pads under furniture or equipment to reduce risk of surface damage.
After installation, do not wash the floor or get it wet for 5 days. After installation, room temperature should be maintained between 15 and 35°C and humidity between 40 and 65% .The Product should be installed and maintained according to the assembling instructions
Please do not use rugs with rubber backing or carpets with vinyl floors
Porous surfaces, such as cement, plywood, hardboard and chipboard should be sealed with a suitable primer. Timber plank floors should be overlaid. New floors must be allowed to dry out completely
Before installation, tiles and planks should be unpacked and stored flat in the room for at least 24h at 18-24degC and humidity maintained between 40% and 65%
All tiles and planks should be checked before and during installation for faults which are clearly visible; this will reduce problems when assembling and identify any colour differences. The inspection should be performed in daylight, or under good artificial lighting, in the room in which the Products are to be installed
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
4.17 / 5(51 reviews)FCDIY - 5 / 5 - 26/2/2024
Game changer
Needed to change a floor and this production was so easy to lay and is hard wearing. Highly Recommend