GoodHome Masoala Matt Black Plug-in Wall light

These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. Check the pack and make sure you have all of the parts listed. Remove all packaging, wrap etc from the product. Decide on the appropriate location for your product.

This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathroom. Caution: Ensure the cable is routed so it does not present a hazard (avoid dangling loops where the cable is likely to be pulled/caught). Never put anything on the product or hang anything on any part of this product.

Always refer to the installation drawing for the orientation of the product.

The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.

Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.

IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.

The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire must be destroyed. When the product does not light after installation: > Ensure there is no electricity failure > Ensure all the connections are secured

If you have any doubt about installation/use of this product, consult a qualified electrician.

It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.