GoodHome Calp Traditional Basin Pillar Tap

For domestic use only.

Check that the tap is suitable for your water system

The minimum supply pressure for this tap is shown on the packaging

Maximum operating pressure 5 bar

This product has been tested to and meets the requirements of The Water Supply (Water Fittings) Regulations. (UK only)

This product must be connected to a water supply in accordance with the Water Supply (Water Fittings) Regulations and UK Building Regulations. If you are in any doubt about these requirements contact a qualified plumber, your local Water Company or the Water Regulations Advisory Scheme (WRAS). (UK only)

Adequate backflow prevention must be included as part of the installation of this tap. For example by fitting non-return valves on the water supply pipes.

It is important that supply pipes are flushed before connecting the tap to ensure no pipe or plumbing debris enters the tap

If a combination boiler is installed turn off the boiler before starting work.

Isolate the hot and cold water supply as close to the tap connections as possible.