See more Glues & adhesives
Diall White Multi-purpose Grab adhesive 200ml
Was €8
€
4
Save €4
€
20
per l
Checking availability...
Product details
Product information
Solvent-free gap-filling construction adhesive, compatible with most building materials, but especially effective on porous surfaces and polystyrene. Does not require cartridge gun. Replaces screws and nails. Virtually odourless
- Guarantee - Statutory
- Suitable for Chipboard, concrete, masonry, plaster & wood
- Keep in unopened container for 12 months. Store in dry conditions between 5°C-25°C and protect from frost
- Surfaces must be clean and solid. All paints should be removed from surfaces where the adhesive will make contact. One of the surfaces must be porous for the bonding to work. Apply a 6mm diameter "zigzag" bead along the length of the item to be bonded onto one surface only, press surfaces together firmly for 30 seconds, some support may be necessary for up to 24 hours
- Contains 1.2 benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one (3:1). May produce an allergic reaction. Warning: Pressurised container, may burst if heated. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Dispose of contents/container in accordance with local/regional/national/international regulation. If eye contact: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Take victim to an ophthalmologist if irritation persists
Legal Information
- EUH208 Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Application method | Nozzle |
---|---|
Base | Acrylic-based |
Bonding strength | High bond strength |
Colour | White |
Drying time | 24 h |
Location | Interior |
Maximum application temperature | 30°C |
Minimum application temperature | 10°C |
Model name/number | 100653551 |
Odour | Odourless |
Sandable | Sandable |
Solvent-free | Solvent-free |
Substance | Acrylic |
Volume | 200ml |
Weight (g) | 306g |
Product code | 5059340110721 |