See more Jointing compound

Home

Right chevron

Building supplies

Right chevron

Plastering supplies

Right chevron

Jointing compound

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Volden Quick dry Plasterboard Jointing, filling & finishing compound 10kg 8.3L Bag
Right chevron

Volden Quick dry Plasterboard Jointing, filling & finishing compound 10kg 8.3L Bag

24.50
24.50
per kg
Loading
Checking availability...

Product details

Product information

    The faster drying formulation make is perfect for repairs. Gypsum based, this powdered product has been designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating.

    • Each 10kg bag can be mixed with 3.8-4.2L of clean water in an appropriate bucket/container. Mix continually until achieving a smooth consistency. For joints and corners, jointing tape can be used and smoothed over with a 200mm wide strip of compound. When the first coat (1mm) is dry or set (approx. 60-90mins) a second coat may be applied. Edges are best feathered 50mm past the first coat. End and butt joints should be feathered 60mm past the first coat. If more coats are needed, edges should be finished as above. Sanding should be done once fully dry (usually overnight). A primer or sealer should be applied before final decoration.
    • Designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating
    • Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.

    Features and benefits

    • Perfect for quickly filling, smoothing walls, ceilings and plasterboard repairs
    • Powdered Formualtion - Easy to Mix
    • Easy to sand
    • Working time 20 mins
    • Can fill up to 5mm deep in one application
    • This plaster's white colour ensures a lower number of coats while painting

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Specifications

    Application methodTrowel or filling knife
    ColourWhite
    Coverage40m²
    Drying time2-3 h
    LocationInternal
    Maximum application temperature30°C
    Minimum application temperature5°C
    Number of coats2
    PaintablePaintable
    Product weight10kg
    SandableSandable
    Setting time60min
    StandardTS EN 13963
    VOC levelNo VOC level recorded
    Volume8.3L
    Product code5063022091529