See more Expanding foam

Home

Right chevron

Expanding foam

Right chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Volden Hand-held Gap filling Expanding foam 300ml

Volden Hand-held Gap filling Expanding foam 300ml

7
23.33
per l
 not suitable for under 18
UNDER
18
Loading
Checking availability...

Product details

Product information

    A moisture-curing, one component, self expanding polyurethane foam for filling, fixing, insulating and mounting.

    • High bond strength
    • CFC & HCFC-free
    • Comes with Straw Nozzle & Gloves
    • Take the usual labour hygiene into account. Always wear gloves and goggles. Remove cured foam mechanically. Never burn away. Consult label and material safety data sheet for more information. Use only in well ventilated areas.
    • Instructions for use: 1. Surfaces should be clean and free from loose particles, dust and grease. 2. Moisten surface with water before application for best results. If necessary, protect areas with masking tape. 3. Shake the aerosol can for at least 30 seconds. 4. Remove the cap and protective gloves contained. Ensure gloves and eye/face protection are worn prior to product use.5. Attach the applicator nozzle on the valve, without overtightening.6. Activate the applicator nozzle, point and apply. The amount of pressure applied defines speed of application. THE CAN MUST ALWAYS BE USED WITH THE VALVE FACING DOWNWARDS.7. Joints and cavities should only be filled 50% to 70% as foam expands twice its original volume. For deep cavities/seals the foam should be applied in layers. Apply moisture to increase curing speed. 8. Excess foam can be removed whilst wet with PU foam cleaner or acetone. Do not use water. Cured product can be removed mechanically only.
    • Crack resistant
    • Moisture resistant
    • Guarantee of Statutory

    Features and benefits

    • High thermal and acoustic insulation
    • HCFC- and CFC-free propellants
    • High filling capacity with excellent adhesion and stability to most common building materials including concrete, brickwork, stone, plaster, wood, metal, insulation materials, pipes, cables and ducts and PVC (except PE, PP and PTFE).

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

     not suitable for under 18
    UNDER
    18

    Specifications

    BrandVolden
    Drying time30-60 min
    Foam typeHand-held
    LocationInterior
    PaintablePaintable
    Product weight291g
    SandableSandable
    Product code5059340045191