UniBond Perfect Finish Indoor Grey Silicone-based General-purpose Sealant, 300ml

• Included: Comes with nozzle
• General-purpose
• Instructions for use: Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit

Features and benefits

• Ideal for use both indoors and outdoors across a multitude of materials
• The neutral curing formula is free from Oximes and MEKO
• Durable UV resistance and low odour
• 20 minutes touch-drying time
• Waterproof and flexible