RONSEAL DAMP SEAL 1 COAT
Product Features
- Ready to paint over in 4 hours
- Permanently blocks damp
- Protects paintwork
Product details
Product information
Product information
Ronseal Damp Seal is ideal for covering damp, water & other household stains, and is a must have purchase for any redecorating project around the interior of your home. It dries in 4 hours and comes in an easily storable tin can. For added convenience, you'll only need to apply one coat to your walls. As it's paintable, it's ideal for colour matching to your existing decor.
- Instructions for Use - Thoroughly stir the paint to ensure it’s well mixed. Use a roller or brush to apply it to the affected area. If it’s only a small damp patch, paint at least 30cm around the area so the damp won’t creep elsewhere. The seal will be touch dry in only two hours. After four hours you will be able to paint or wallpaper over the damp area.
- Safety Information - Keep out of reach of children
- Guarantee - Statutory
Features and benefits
- Ready to paint over in 4 hours
- Permanently blocks damp
- Protects paintwork
- No need for preparation, it can be painted straight onto the wall
- Ronseal One Coat Damp Seal can be applied straight onto damp. It'll seal it, permanently cover any damp stains and stop it damaging your paint.
- Prevents paint from flaking & peeling
Legal information
- Flammable liquid and vapour. Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Application method | Brush or roller |
|---|---|
| Brand | Ronseal |
| Colour group | White |
| Container type | Tin |
| Location | Interior |
| Maximum application temperature | 40°C |
| Minimum application temperature | 10°C |
| Model name/number | 36958 |
| Pack quantity | 1 |
| VOC level | High |
| Weight (g) | 3810g |
| Product code | 5010214869589 |
Documents
Safety Data Sheet
Safety Information
Warning. Conatins Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Portland Cement Flammable liquid and vapour. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Wear protective clothing. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Store locked up. Dispose of contents and container in accordance with all local, regional, national and international regulations. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Flame
Exclamation mark
Manufacturer / EU responsible person
EU responsible person
Sherwin-Williams (Ireland) Ltd
Address
Unit 53
Robinhood Industrial Estate
Dublin 22
D22PW99
Ireland