Skip to content
 

Mapei MapePave Grey Paving slurry, 20kg Bag

€29€1.45 per kg

Product Features

  • Just mix with water
  • Low shrinkage
  • Rapid curing – open to pedestrian traffic after 12 hours

Product details

Product information

Product information

Mapei MapePave Slurry is a bonding agent for the rapid installation of exterior paving, including 20mm porcelain. Suitable for external floors, and architectural and urban paving.

  • Instructions for Use - Mix a 20 kg bag of MapePave Slurry with 6.2-6.6 litres of water for at least 3 minutes with a drill mixer until a pourable consistency is obtained. The mix must be applied to the rear of the installing paver.
  • Safety Information - Keep out of reach of children. Protect from moisture and frost.
  • Guarantee - Statutory

Features and benefits

  • Just mix with water
  • Low shrinkage
  • Rapid curing – open to pedestrian traffic after 12 hours
  • Surfaces may be put into service after approx. 4 days
  • Joints can be grouted after 24 hours
  • Excellent resistance to ageing
  • Excellent resistance to solvents and oils
  • Excellent resistance to moisture

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Specifications

Application methodTrowel
BrandMapei
Colour groupGrey
Container typeBag
LocationExterior
Maximum application temperature30°C
Minimum application temperature5°C
Model name/numberMAPEPAVE
Pack quantity1
VOC levelLow
Weight (g)20000g
Product code8022452561580
Safety Information

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H318 Causes serious eye damage.

H335 May cause respiratory irritation.

P261 Avoid breathing dust.

P264 Wash skin thoroughly after handling.

P280 Wear protective gloves/clothing and eye/face protection.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P312 Call a POISON CENTER if you feel unwell.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

Manufacturer / EU responsible person

EU responsible person

MAPEI S.P.A

Address

MAPEI S.P.A

VIA CAFIERO,

22 - 20158 MILANO

MILANO

22 - 20158 MILANO

Italy

Contact