GoodHome Antpitta Glass & metal Chrome effect LED Bathroom ceiling light
Product Features
- Ideal for use in the bathroom, this GoodHome ceiling light works perfectly as the main source of light.
- The Antpitta ceiling lamp has a neutral design that will fit the style of your bathroom. Complete the look with other products in this range.
- This ceiling light is resistant to water.
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
Upgrade your bathroom lighting with our GoodHome Antpitta ceiling light, a perfect blend of elegance and practicality. Designed to enhance your daily routine, this stylish fixture brings optimal illumination to your space, ensuring both functionality and aesthetic appeal.
- Guarantee - 2 years
- Bulb not included
- Non-dimmable
- Fittings & fixings included
Features and benefits
- Ideal for use in the bathroom, this GoodHome ceiling light works perfectly as the main source of light.
- The Antpitta ceiling lamp has a neutral design that will fit the style of your bathroom. Complete the look with other products in this range.
- This ceiling light is resistant to water.
Specifications
| Adjustable height | Without adjustable height |
|---|---|
| Base colour | Chrome |
| Bathroom zone | Zones 2 & 3 |
| Brand | GoodHome |
| Bulb type | GLS |
| Cap fitting | Edison screw cap (E27) |
| Diameter (mm) | 250mm |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Glass finish | Clear |
| Height (mm) | 204mm |
| IEC protection class | Class II |
| IP rating | IP44 |
| Light colour | Warm white |
| Light technology | LED |
| Material | Glass & metal |
| Maximum bulb wattage | 15W |
| Model name/number | R38881C1 |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Room use | Any room, including wet-rooms |
| Voltage | 240V |
| Product code | 5059340869407 |
Documents
Product Instruction Manual
Safety Information
These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc from the product.
Decide on the appropriate location for your product.
CAUTION: IP44 is guaranteed when the product is properly installed and sealed
Always refer to the installation drawing for the orientation of the product.
The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands