Evo-Stik Sticks Like Sh*t White Water resistant Grab adhesive, Volume 290ml

Product information

This grab adhesive from the Sticks Like Sh*t range by Evo-Stik has a 24 hour drying time, and is suitable for use with interior & exterior use.

• Suitable for Multi-surface
• Resistant to abrasion & water
• Store for up to 18 months from date of manufacture when stored in original, unopened packaging under dry conditions within the temperature range of +5°C to +25°C and out of direct sunlight. Protect from frost.
• Surfaces must be sound, clean and free from any contaminants such as dust, oil, grease and any loose material. Cut off the dome at the top of the cartridge taking care not to damage the thread. Cut the nozzle to the desired width and angle and screw onto the cartridge. Insert the cartridge into a cartridge gun and repeatedly squeeze the trigger until the adhesive appears. Apply parallel beads of adhesive to one of the surfaces, align and bring the surfaces together within 10 minutes.
• EVO-STIK Sticks Like Sh*t Adhesive White will not bond Polyethylene, Polypropylene or Teflon. It should not be used on surfaces contaminated with bitumen. EVO-STIK Sticks Like Sh*t Adhesive White is not suitable for continuous submersion in water. EVO-STIK Sticks Like Sh*t Adhesive White must not be used to bond mirrors if the mirror is backed with plastic safety film. Do not bond mirrors to painted surfaces, as the decorative finish will be unable to support the load.

Features and benefits

• Superior strength, weatherproof grab adhesive
• It can resist extreme temperatures and movement
• Sticks to wet surfaces
• Hi-tech SM polymer