Evo-Stik Gripfill Max White Weatherproof Grab adhesive, Volume 290ml

Product information

A versatile gap filling adhesive that not only offers excellent initial grab and a high strength bond but also provides a flexible, water resistant seal.

• Resistant to cracking, moisture & ultraviolet. Weatherproof
• Store between +5°C and +25°C and in shaded conditions in original unopened packaging
• Cut off the dome at the top of the cartridge taking care not to damage the thread. Cut the nozzle to the desired width and angle and screw onto the cartridge. Insert the cartridge into a cartridge gun and repeatedly squeeze the trigger until the adhesive appears. Apply parallel beads of adhesive to one of the surfaces, align and bring the surfaces together within 10 minutes. Beads 5mm in diameter are generally sufficient. For close fitting surfaces the bead may be reduced to 3mm diameter. Consult TDS before use.
• Keep out of reach of children

Features and benefits

• Bonds to wet surfaces and can even be used under water
• Will bond most surfaces, even if both are non porous
• Can be used in extreme weather conditions
• Excellent adhesion and initial grab
• Wide service temperature range -40°C to +100°C